SEMOLINA DRYER PNEUMATIC/DRUM TYPE

Industrial Chain Sprockets

A sprocket or sprocket-wheel is a profiled wheel with teeth, cogs, or even sprockets that mesh with a chain, track, or other perforated or indented material. The name ‘sprocket’ applies generally to any wheel upon which radial projections engage a chain passing over it.

DUPLEX CHAIN SPROCKET
TEETH	Sizes
10	3/8″	1/2″	5/8″	3/4″	1″	1.25″
11	3/8″	1/2″	5/8″	3/4″	1″	1.25″
12	3/8″	1/2″	5/8″	3/4″	1″	1.25″
13	3/8″	1/2″	5/8″	3/4″	1″	1.25″
14	3/8″	1/2″	5/8″	3/4″	1″	1.25″
15	3/8″	1/2″	5/8″	3/4″	1″	1.25″
16	3/8″	1/2″	5/8″	3/4″	1″	1.25″
17	3/8″	1/2″	5/8″	3/4″	1″	1.25″
18	3/8″	1/2″	5/8″	3/4″	1″	1.25″
19	3/8″	1/2″	5/8″	3/4″	1″	1.25″
20	3/8″	1/2″	5/8″	3/4″	1″	1.25″
21	3/8″	1/2″	5/8″	3/4″	1″	1.25″
22	3/8″	1/2″	5/8″	3/4″	1″	1.25″
23	3/8″	1/2″	5/8″	3/4″	1″	1.25″
24	3/8″	1/2″	5/8″	3/4″	1″	1.25″
25	3/8″	1/2″	5/8″	3/4″	1″	1.25″
26	3/8″	1/2″	5/8″	3/4″	1″	1.25″
27	3/8″	1/2″	5/8″	3/4″	1″	1.25″
28	3/8″	1/2″	5/8″	3/4″	1″	1.25″
29	3/8″	1/2″	5/8″	3/4″	1″	1.25″
30	3/8″	1/2″	5/8″	3/4″	1″	1.25″
31	3/8″	1/2″	5/8″	3/4″	1″	1.25″
32	3/8″	1/2″	5/8″	3/4″	1″	1.25″
33	3/8″	1/2″	5/8″	3/4″	1″	1.25″
34	3/8″	1/2″	5/8″	3/4″	1″	1.25″
35	3/8″	1/2″	5/8″	3/4″	1″	1.25″
36	3/8″	1/2″	5/8″	3/4″	1″	1.25″
37	3/8″	1/2″	5/8″	3/4″	1″	1.25″
38	3/8″	1/2″	5/8″	3/4″	1″	1.25″
39	3/8″	1/2″	5/8″	3/4″	1″	1.25″
40	3/8″	1/2″	5/8″	3/4″	1″	1.25″
41	3/8″	1/2″	5/8″	3/4″	1″	1.25″
42	3/8″	1/2″	5/8″	3/4″	1″	1.25″
43	3/8″	1/2″	5/8″	3/4″	1″	1.25″
44	3/8″	1/2″	5/8″	3/4″	1″	1.25″
45	3/8″	1/2″	5/8″	3/4″	1″	1.25″
46	3/8″	1/2″	5/8″	3/4″	1″	1.25″
47	3/8″	1/2″	5/8″	3/4″	1″	1.25″
48	3/8″	1/2″	5/8″	3/4″	1″	1.25″
50	3/8″	1/2″	5/8″	3/4″	1″	1.25″
51		1/2″	5/8″	3/4″	1″
52		1/2″	5/8″	3/4″	1″
53		1/2″	5/8″	3/4″	1″
54		1/2″	5/8″	3/4″	1″
55		1/2″	5/8″	3/4″	1″
56		1/2″	5/8″	3/4″	1″
57		1/2″	5/8″	3/4″	1″
58		1/2″	5/8″	3/4″	1″
60		1/2″	5/8″	3/4″	1″

Duplex Chain Sprocket

Double Roller Chain Sprockets are widely used in Industrial/ Mechanical Power Transmission and Conveyors.

Wrap Testing

• 100% of the sprockets are subjected to a wrap test with the corresponding chain for checking the fitment between chain and sprocket.

• Wrap test ensures correctness of P.C.D and Root Diameter which are critical for fitment at site.

Hardening of Sprockets

• Sprockets and Traction wheels, the working portion will be Induction Hardened to higher case depth for better wear resistance based on request.

• The tooth portion where the chain roller engages will be hardened to resist abrasion.

• This enhances the working life of the sprocket 1 traction wheel.

Paired Sprockets

• In paired sprockets, the key way alignments are checked, and the straightness of the teeth is ensured during inspection.

• This facilitates easy assembly of sprockets into the shafts at the site.